When a consignment of pipe fittings arrives, receiving inspection is the last practical chance to catch a dimensional problem before the parts go to the fabrication shop. A wrong bevel, an undersize wall or a reducer with the wrong offset is far cheaper to reject at the gate than to discover at fit-up. This checklist sets out what to check, what to measure it against and what records to keep.

1. Check Against the Right Reference

Every check needs a reference. Before measuring anything, collect:

  • The purchase order line item – fitting type, size, schedule or class, material grade and quantity.
  • The dimensional standard named on the order – usually ASME B16.9 for buttweld fittings, ASME B16.11 for forged socket weld and threaded fittings, and MSS SP-43 for light-wall stainless fittings.
  • Any approved drawing for non-standard items, with its revision number.
  • The supplier’s mill test certificate (EN 10204 3.1 or 3.2) and packing list.

2. Identification and Marking

  • Marking shows manufacturer’s mark, material grade, size, schedule or class, and heat number as required by the material and dimensional standard.
  • Heat numbers on the fittings match the heat numbers on the test certificate.
  • Quantities per heat and per size match the packing list.

Traceability checks come first: a dimensionally perfect fitting without matching heat records is still a nonconformance.

3. Buttweld Fittings: What to Measure

FeatureWhat to check
Outside diameter at the bevelWithin the tolerance of the dimensional standard for the size
Wall thicknessNot below the minimum allowed for the ordered schedule – check several points, especially the outside of elbows and the crotch of tees
Centre-to-end / end-to-endElbow, tee and reducer dimensions against the standard tables
End preparationBevel angle and root face to ASME B16.25 or the order requirement
Squareness and angularityOff-angle and off-plane within the standard’s tolerance

4. Forged Fittings: What to Measure

  • Socket bore diameter and socket depth for socket weld fittings.
  • Thread form and gauging for threaded fittings (for example NPT to ASME B1.20.1).
  • Body wall and centre-to-bottom-of-socket or centre-to-end dimensions to ASME B16.11.
  • Pressure class marking matches the order (Class 2000, 3000, 6000 or 9000).

5. Visual and Surface Condition

  • No cracks, laps, seams or sharp gouges; any grinding repair blends smoothly and does not reduce wall below minimum.
  • Bevel faces free of damage; end protectors fitted.
  • Stainless steel fittings free from carbon-steel contamination and rust staining.

6. Sampling, Tools and Records

Agree the sampling plan in the purchase order – many buyers check every fitting for marking and a percentage for dimensions, rising to 100% after any failure. Use calibrated tools (vernier or digital calipers, ultrasonic wall-thickness gauge, bevel protractor, thread gauges) and record each measured value against the drawing or table value, with the inspector’s name, the date and the tool identification.

7. When Something Fails

Quarantine the affected items, raise a nonconformance report with photos and measured values, and notify the supplier before any rework. Do not accept repairs that were not agreed in writing.

Related guides: how to read an EN 10204 3.1 MTC, PMI, MTC and heat traceability and our fitting RFQ guide.

Frequently Asked Questions

Which standard should fittings be measured against?

Against the dimensional standard named on the purchase order – typically ASME B16.9 for buttweld fittings, ASME B16.11 for forged socket weld and threaded fittings, and MSS SP-43 for light-wall stainless fittings – plus any approved drawing for special items.

What is the most important dimension to check on buttweld fittings?

Minimum wall thickness, because it governs pressure capacity. Check several points, especially the outside radius of elbows and the crotch of tees, which are thinned during forming.

Do I need to check every fitting?

Agree a sampling plan in the order. Marking and traceability are usually checked on every item, and dimensions on a sample, increased to 100% if a defect is found.

Drop us a line

We respects customer privacy and ensures absolute confidentiality of any information that is given to us.

We respect your privacy.

WhatsApp Get a Quote