Stainless Steel 410 Fasteners are martensitic stainless steel fasteners manufactured from UNS S41000 material. They offer high strength, hardness and wear resistance with moderate corrosion resistance and can be heat treated to obtain different mechanical properties. They are commonly used in machinery, petrochemical, power, oil & gas, construction and general engineering applications.
Stainless Steel 410 Fasteners | UNS S41000 Bolts & Studs
Stainless Steel 410 Fasteners are martensitic stainless steel fastening components designed for applications requiring a combination of strength, hardness, wear resistance and moderate corrosion resistance. Also known as AISI 410, UNS S41000, WNR 1.4006, JIS SUS 410 and INOX 410, this grade is widely used for bolts, nuts, screws, studs, threaded rods and other industrial fastening products.
We manufacture and supply SS 410 Fasteners in different sizes, thread configurations, finishes and heat-treated conditions according to application and customer requirements. These fasteners can be supplied as 410 Stainless Steel Bolts and Nuts, UNS S41000 Bolts, 410 Stainless Steel Stud Bolts & Threaded Rods and UNS S41000 Self Drilling Screws.
Table of Contents
- ➤ Key Features and Advantages of SS 410 Fasteners
- ➤ Types of Stainless Steel 410 Fasteners
- ➤ Stainless Steel 410 Fasteners Specifications
- ➤ Chemical Properties of SS 410
- ➤ Mechanical Properties of 410 Stainless Steel Fasteners
- ➤ Physical Properties of SS 410
- ➤ Stainless Steel 410 Equivalent Grades
- ➤ Manufacturing Process of 410 Stainless Steel Fasteners
- ➤ Applications of SS 410 Fasteners
- ➤ Why Choose Us for 410 Stainless Steel Bolts and Nuts?
Key Features and Advantages of SS 410 Fasteners
- Martensitic stainless steel construction for high strength and hardness.
- Good resistance to wear, abrasion and atmospheric corrosion.
- Can be heat treated and hardened to achieve higher mechanical strength.
- Suitable for applications requiring strong and durable fastening.
- Good machinability in the annealed condition.
- Available in bolts, nuts, screws, studs and threaded rods.
- Suitable for elevated-temperature applications within appropriate service limits.
- Available with different thread forms, dimensions and surface finishes.
- Can be supplied with inspection documentation and material test certificates.
- Suitable for customized dimensions and special fastener requirements.
Why Choose Heat Treated Hardened 410 SS Fasteners?
Heat Treated Hardened 410 SS Fasteners are selected when higher hardness, tensile strength and wear resistance are more important than maximum corrosion resistance. Heat treatment allows Grade 410 to develop substantially higher mechanical properties than its annealed condition.
However, 410 stainless steel should not be selected solely for corrosion resistance in highly aggressive chloride or marine environments. In such conditions, austenitic or duplex stainless steels may be more appropriate.
Types of Stainless Steel 410 Fasteners
We supply a broad range of 410 SS Fasteners, including:
- 410 Stainless Steel Hex Bolts
- 410 Stainless Steel Heavy Hex Bolts
- 410 Stainless Steel Hex Nuts
- UNS S41000 Stud Bolts
- 410 Stainless Steel Threaded Rods
- UNS S41000 Self Drilling Screws
- INOX 410 Screws
- EN 56A Screws
- 410 Stainless Steel Machine Screws
- 410 Stainless Steel Socket Head Screws
- 410 Stainless Steel Washers
- 410 Stainless Steel Anchor Bolts
- Custom-made SS 410 Fasteners
For projects requiring specific dimensions or special machining, we can manufacture fasteners according to drawings, specifications and applicable standards.
Stainless Steel 410 Fasteners Specifications
| Property | Details |
|---|---|
| Material Grade | Stainless Steel 410 |
| UNS | S41000 |
| AISI | 410 |
| Werkstoff Number | 1.4006 |
| JIS | SUS 410 |
| EN Designation | X12Cr13 |
| Material Type | Martensitic Stainless Steel |
| Product Forms | Bolts, Nuts, Screws, Studs, Threaded Rods, Washers |
| Standards | ASTM, ASME, DIN, EN, JIS and customer specifications |
| Thread | UNC, UNF, Metric, BSW and other threads |
| Finish | Plain, Passivated, Pickled, Polished or as required |
| Supply Condition | Annealed or Heat Treated |
Note: Exact dimensions, tolerances, grades and mechanical requirements depend on the applicable product standard and purchase specification.
Chemical Properties of SS 410
The typical chemical composition of Type 410 stainless steel is shown below. Exact limits should always be confirmed against the applicable material standard.
| Element | Typical Composition (%) |
|---|---|
| Carbon | ≤ 0.15 |
| Manganese | ≤ 1.00 |
| Silicon | ≤ 1.00 |
| Chromium | 11.5–13.5 |
| Nickel | ≤ 0.75 |
| Phosphorus | ≤ 0.040 |
| Sulfur | ≤ 0.030 |
| Iron | Balance |
The chromium content provides corrosion resistance, while the martensitic structure allows the material to achieve high hardness and strength through suitable heat treatment.
Mechanical Properties of 410 Stainless Steel Fasteners
The mechanical properties of ASTM A193 Grade 410 Fasteners and other 410 fastener products can vary according to product standard, heat-treatment condition, diameter and manufacturing specification. Typical characteristics include:
| Property | Typical / General Value |
|---|---|
| Tensile Strength | Up to approximately 550–750 MPa or higher depending on condition |
| Yield Strength | Dependent on heat treatment and applicable standard |
| Hardness | Can be substantially increased through heat treatment |
| Elongation | Dependent on condition |
| Material Condition | Annealed or hardened/tempered |
For critical applications, the required tensile strength, yield strength, hardness and elongation should be specified according to the relevant ASTM, ASME, DIN, EN or customer standard.
Physical Properties of SS 410
| Physical Property | Typical Value |
|---|---|
| Density | ~7.75 g/cm³ |
| Melting Range | ~1480–1530°C |
| Modulus of Elasticity | ~200 GPa |
| Thermal Conductivity | ~24 W/m·K |
| Electrical Resistivity | ~570 nΩ·m |
| Specific Heat | ~460 J/kg·K |
| Thermal Expansion | ~9.9 × 10⁻⁶/K |
These values are representative and may vary according to material condition and testing temperature.
Stainless Steel 410 Equivalent Grades
| Standard | Equivalent / Designation |
|---|---|
| UNS | S41000 |
| AISI | 410 |
| JIS | SUS 410 |
| WNR | 1.4006 |
| EN | X12Cr13 |
| EN Material Family | Martensitic stainless steel |
| Common Trade Description | 410 Stainless Steel / INOX 410 |
ASTM A479 410 Fasteners may be supplied where the applicable product form and specification permit the use of ASTM A479 material. For bolting applications, the exact ASTM/ASME fastener specification should be confirmed before ordering.
Manufacturing Process of 410 Stainless Steel Fasteners
Applications of SS 410 Fasteners
Because of their strength, hardness and moderate corrosion resistance, Martensitic SS 410 Fasteners are used across several industries.
- Oil & Gas: Used in equipment, machinery and general fastening applications where strength and moderate corrosion resistance are required.
- Petrochemical & Chemical: Suitable for selected process equipment and mechanical assemblies where the environment is compatible with 410 stainless steel.
- Power Generation: Used in machinery, maintenance applications, equipment assemblies and components requiring high-strength fastening.
- Construction & Infrastructure: 410 bolts, nuts and screws are used for structural and mechanical fastening applications.
- Automotive: Suitable for selected automotive components where hardness, wear resistance and mechanical strength are important.
- General Engineering: Commonly used in pumps, valves, shafts, machinery and industrial equipment.
Why Choose Us for 410 Stainless Steel Bolts and Nuts?
As an experienced SS 410 Fasteners Manufacturer and 410 Stainless Steel Fasteners Supplier, we focus on supplying products that meet the dimensional, material and application requirements of industrial buyers.
What you can expect:- Wide range of SS 410 Fasteners in different sizes and configurations.
- Supply of UNS S41000 Bolts, Studs, Screws and Threaded Rods.
- Support for standard and customized fastener requirements.
- Material supplied according to agreed specifications and standards.
- Heat-treated options available for applications requiring higher hardness.
- Inspection and material documentation available as required.
- Suitable packaging for domestic and international shipments.
- Competitive pricing and dependable delivery support.
- Experience serving industrial, EPC, engineering and infrastructure requirements.
For customers looking for an SS 410 Self Drilling Screws Stockist, we can also discuss availability, dimensions, quantities and required specifications before quotation.
Related Stainless Steel Fasteners
We also supply:
- Stainless Steel 304 fasteners
- Stainless Steel 304l Fasteners
- Stainless Steel 304H Fasteners
- Stainless Steel 309 Fasteners
- Stainless Steel 309S Fasteners
- Stainless Steel 309H Fasteners
- Stainless Steel 310 Fasteners
- Stainless Steel 310S Fasteners
- Stainless Steel 310H Fasteners
- Stainless Steel 316 Fasteners
- Stainless Steel 316L Fasteners
- Stainless Steel 316H Fasteners
- Stainless Steel 316TI Fasteners
- Stainless Steel 317 Fasteners
- Stainless Steel 317L Fasteners
- Stainless Steel 321 Fasteners
- Stainless Steel 321H Fasteners
- Stainless Steel 347 Fasteners
- Stainless Steel 347H Fasteners
- Stainless Steel 410 Fasteners
- Stainless Steel 446 Fasteners
- Stainless Steel 904L Fasteners
Request a Quote for AISI 410 Fasteners
Looking for 410 Stainless Steel Bolts and Nuts, UNS S41000 Stud Bolts, 410 SS Fasteners or Heat Treated Hardened 410 SS Fasteners?
Send us your required size, quantity, fastener type, standard, thread specification, heat-treatment condition and delivery location. Our team can review your requirements and provide a suitable quotation.
Frequently Asked Questions
Request a Quote → Get Pricing for SS 410 Fasteners
