If you’re looking for ASTM B381 23 Titanium Forged Fittings that deliver dependable performance in demanding environments, you’re in the right place. We manufacture and supply premium ASTM B381 Forged Fitting products made from ASTM B381 Grade 23 Ti6Al4V, also known as Ti Grade 6Al-4V ELI Grade 23. These fittings are widely used in aerospace, offshore, chemical processing, medical, and high-performance industrial systems— where safety margins are tight and reliability matters most.
All our ASTM Gr 23 Titanium pipe fittings are produced in line with standards issued by ASTM International and are supplied with full material traceability and test documentation. As EXPORTERS, STOCKIST & MANUFACTURER OF TITANIUM GRADE 23 FITTINGS, we focus on one goal: supply fittings that install easily, perform consistently, and last for years in tough service conditions.
Table of Contents
- ➤ What Is ASTM B381 Grade 23 Titanium?
- ➤ Product Range: ASTM Gr 23 Titanium Pipe Fittings
- ➤ Specifications Chart – ASTM B381 23 Titanium Forged Fittings
- ➤ Chemical Composition of Titanium Grade 23 (ELI)
- ➤ Mechanical Properties: Titanium Grade 23
- ➤ Typical Applications of ASTM B381 23 Titanium Forged Fittings
- ➤ Why Choose Forged Titanium Grade 23 Fittings?
What Is ASTM B381 Grade 23 Titanium?
Titanium Grade 23 is the ELI (Extra Low Interstitial) version of the popular Ti-6Al-4V alloy. In simple terms, it offers:
- The same excellent strength-to-weight ratio as Grade 5
- Better toughness and fracture resistance, especially at low temperatures
- Superior fatigue performance in cyclic loading conditions
- Outstanding corrosion resistance in seawater and many chemical
- Good biocompatibility, which is why it’s used in medical and aerospace parts
When this alloy is forged under the ASTM B381 specification, the result is a fitting with refined grain structure, higher structural integrity, and long-term reliability. That’s why engineers often specify Titanium Grade 23 Pipe Fitting products for safety-critical systems.
Product Range: ASTM Gr 23 Titanium Pipe Fittings
We manufacture and supply a complete range of Titanium Gr 23 Pipe Fitting products, including:
- Elbows (45°, 90°, 180° – long & short radius)
- Tees (equal and reducing)
- Crosses
- Couplings and half couplings
- Caps and plugs
- Stub ends
- Titanium Gr.23 Reducer (concentric & eccentric)
- Custom forged fittings as per drawings or specifications
Whether you need a standard ASTM B381 Forged Fitting or a project-specific design, we can produce it with tight tolerances and consistent quality.
Specifications Chart – ASTM B381 23 Titanium Forged Fittings
Before choosing any piping component, engineers and buyers want clear technical data. Below is a quick and practical specifications chart for ASTM B381 2 Titanium Forged Fittings.
| Parameter | Details |
|---|---|
| Product | ASTM B381 23 Titanium Forged Fittings |
| Material Grade | Titanium Grade 23 (Ti-6Al-4V ELI) |
| Standard | ASTM B381 |
| Size Range | 1/2" NB to 48" NB (custom sizes available) |
| Types | Elbow, Tee, Reducer, Cap, Coupling, Stub End, Custom |
| Manufacturing Process | Closed-die / Open-die forging + Precision machining |
| Pressure Rating | As per ASME / customer requirement |
| Surface Finish | Pickled, machined, or as specified |
| Testing | Chemical, Mechanical, Dimensional, NDT (if required) |
| Documentation | MTC, Heat No., Traceability, Inspection Reports |
| Packing | Seaworthy packing for domestic & export shipments |
Chemical Composition of Titanium Grade 23 (ELI)
The key difference between Grade 23 and standard Ti-6Al-4V is the lower interstitial content (oxygen, iron, etc.), which improves toughness and crack resistance. Here’s the typical chemical composition:
| Element | Composition (%) |
|---|---|
| Titanium (Ti) | Balance |
| Aluminum (Al) | 5.5 – 6.5 |
| Vanadium (V) | 3.5 – 4.5 |
| Iron (Fe) | ≤ 0.25 |
| Oxygen (O) | ≤ 0.13 |
| Carbon (C) | ≤ 0.08 |
| Nitrogen (N) | ≤ 0.05 |
| Hydrogen (H) | ≤ 0.012 |
This controlled chemistry is what gives ASTM B381 Grade 23 Ti6Al4V its excellent combination of strength, toughness, and corrosion resistance.
Mechanical Properties: Titanium Grade 23
| Property | Typical Value |
|---|---|
| Tensile Strength | ≥ 860 MPa |
| Yield Strength (0.2% Proof) | ≥ 795 MPa |
| Elongation | ≥ 10% |
| Reduction of Area | ≥ 25% |
| Hardness | ~ 34 HRC (maximum, typical lower) |
| Density | ~ 4.43 g/cm³ |
Typical Applications of ASTM B381 23 Titanium Forged Fittings
Our ASTM B381 23 Titanium Forged Fittings are widely used in:
- Aerospace hydraulic and fuel systems
- Offshore oil & gas and subsea pipelines
- Chemical and petrochemical processing plants
- Desalination and seawater systems
- Power generation equipment
- Medical and high-purity process industries
- Motorsport and high-performance engineering
Anywhere weight savings, strength, and corrosion resistance are critical, Titanium Gr 23 Pipe Fitting Supplier solutions are the smart choice.
Why Choose Forged Titanium Grade 23 Fittings?
- Higher Structural Strength:Forging aligns the metal’s grain flow with the shape of the fitting, improving load-bearing capacity and impact resistance.
- Better Fatigue Life:Important for systems exposed to vibration, pressure cycles, and temperature changes.
- Excellent Corrosion Resistance:Titanium naturally forms a protective oxide layer, making Grade 23 suitable for seawater, chlorides, and many aggressive chemicals.
- Lightweight with High Strength:Compared to steel, titanium offers similar strength at much lower weight—easier handling and lower system loads.
- Long Service Life:Less maintenance, fewer replacements, and better overall life-cycle cost for critical installations.
Why Engineers and Buyers Work With Us As Their Titanium Grade 23 Pipe Fitting Suppliers
- Complete range of ASTM B381 23 Titanium Forged Fittings
- In-house forging and machining for consistent quality
- Strong stock and flexible production for faster delivery
- Custom sizes and special designs available
- Export-ready packing and documentation
- Technical support that helps you select the right product—first time
If you’re searching for a dependable Titanium Gr 23 Pipe Fitting Manufacturer in India, or a long-term Titanium Gr 23 Pipe Fitting Exporter and supplier for global projects, we’re ready to support you from inquiry to installation.
Titanium Gr 23 Pipe Fitting Manufacturer in India
ASTM B381 23 Titanium Forged Fittings are chosen when failure is not an option. With high strength, low weight, and outstanding corrosion resistance, Titanium Grade 23 Pipe Fitting products deliver long-term reliability in the toughest environments.
If you need a trusted ASTM B381 Forged Fitting partner—whether as a Titanium Gr 23 Pipe Fitting Supplier, Exporter, or Manufacturer in India—we’re here to help you build safer, stronger, and longer-lasting systems.
Request Your ASTM B381 Grade 23 Titanium Forged Fittings Quote Today!
